A composite anode including silicon oxide, amorphous carbon and few -layer graphene (FLG) is investigated for Li -ion battery. The material reflects both the amorphous structure of the silicon oxide and the crystalline one of the FLG, with a morphology consisting of micrometric FLG flakes and carbon surrounded by nanometric particles of silicon oxide. The electrode shows reversible Li -alloying and Li -insertion processes between 0.01 and 0.30 V vs. Li+/Li, as well as an interphase progressively improving and activating upon cell operation, with a decrease of the resistance. Galvanostatic cycling shows maximum capacity of about 400 mAh g-1, rate capability extended to 240 mA g-1, and cell life of 200 cycles with capacity retention of 94%. The anode is chemically pre-lithiated to remove the initial irreversible capacity using direct contact with lithium metal, and combined with a LiNi0.33Mn0.33Co0.33O2 (NCM) layered oxide cathode in a Li -ion battery. The full -cell shows an electrochemical process centered at 3.5 V with a capacity of 158 mAh g-1 retained for 90% over 120 cycles, a coulombic efficiency exceeding 98%, and rate capability extended up to 3C. Ex -situ studies of the electrodes evidence the full retention of the morphology and structure over cycling.

A lithium-ion battery with cycling stability promoted by the progressive activation of a silicon oxide anode in graphene-amorphous carbon matrix

Barcaro, Edoardo;Marangon, Vittorio;Mutarelli, Marco;Hassoun, Jusef
2024

Abstract

A composite anode including silicon oxide, amorphous carbon and few -layer graphene (FLG) is investigated for Li -ion battery. The material reflects both the amorphous structure of the silicon oxide and the crystalline one of the FLG, with a morphology consisting of micrometric FLG flakes and carbon surrounded by nanometric particles of silicon oxide. The electrode shows reversible Li -alloying and Li -insertion processes between 0.01 and 0.30 V vs. Li+/Li, as well as an interphase progressively improving and activating upon cell operation, with a decrease of the resistance. Galvanostatic cycling shows maximum capacity of about 400 mAh g-1, rate capability extended to 240 mA g-1, and cell life of 200 cycles with capacity retention of 94%. The anode is chemically pre-lithiated to remove the initial irreversible capacity using direct contact with lithium metal, and combined with a LiNi0.33Mn0.33Co0.33O2 (NCM) layered oxide cathode in a Li -ion battery. The full -cell shows an electrochemical process centered at 3.5 V with a capacity of 158 mAh g-1 retained for 90% over 120 cycles, a coulombic efficiency exceeding 98%, and rate capability extended up to 3C. Ex -situ studies of the electrodes evidence the full retention of the morphology and structure over cycling.
2024
Barcaro, Edoardo; Marangon, Vittorio; Mutarelli, Marco; Hassoun, Jusef
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in SFERA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11392/2543411
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 4
  • ???jsp.display-item.citation.isi??? 4
social impact