The new nanocomposite of NaP-Hydroxyapatite (NaP:HAp) has been developed for removal of fluoride from aqueous solution. NaP:HAp nanocomposite has been characterized by using different method such as: X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), Energy Dispersive X-ray analysis (EDAX), surface area (BET) and thermal gravimetric analysis (TGA). Box–Behnken design with three-level and four-factor has been employed for determination of effective process parameters such as solution pH (4–11), temperature (25–55° C), initial adsorbent dose (1–3 g) and initial fluoride concentration (5–25 mg/L) on removal of fluoride from aqueous solution. After 29 batch runs, Quadratic model was established by regression analysis of the experimental data obtained from 29 batch runs. Quantity uptake of fluoride was evaluated using the Langmuir, Freundlich and Dubinin–Radushkevich (DR) models. The rate of adsorption was rapid and followed pseudo-second-order kinetics for this adsorbent. Moreover, thermodynamic parameters (ΔΗ°, ΔG°, ΔS°) for fluoride sorption on NaP:HAp nanocomposite was also studied from the temperature dependence. The significant novelty of this work is the simple preparation of a new nanocomposite from Hydroxyapatite and zeolite that increased stability of HAp in different pH and temperature. Also, this nanocomposite shows high capacity for adsorption of fluoride related of other sorbent and reusable for several times that makes this method nearly green and friendly environmentally.
Removal of fluoride from aqueous solution by adsorption on NaP:HAp nanocomposite using response surface methodology
CRUCIANI, GiuseppeUltimo
2017
Abstract
The new nanocomposite of NaP-Hydroxyapatite (NaP:HAp) has been developed for removal of fluoride from aqueous solution. NaP:HAp nanocomposite has been characterized by using different method such as: X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), Energy Dispersive X-ray analysis (EDAX), surface area (BET) and thermal gravimetric analysis (TGA). Box–Behnken design with three-level and four-factor has been employed for determination of effective process parameters such as solution pH (4–11), temperature (25–55° C), initial adsorbent dose (1–3 g) and initial fluoride concentration (5–25 mg/L) on removal of fluoride from aqueous solution. After 29 batch runs, Quadratic model was established by regression analysis of the experimental data obtained from 29 batch runs. Quantity uptake of fluoride was evaluated using the Langmuir, Freundlich and Dubinin–Radushkevich (DR) models. The rate of adsorption was rapid and followed pseudo-second-order kinetics for this adsorbent. Moreover, thermodynamic parameters (ΔΗ°, ΔG°, ΔS°) for fluoride sorption on NaP:HAp nanocomposite was also studied from the temperature dependence. The significant novelty of this work is the simple preparation of a new nanocomposite from Hydroxyapatite and zeolite that increased stability of HAp in different pH and temperature. Also, this nanocomposite shows high capacity for adsorption of fluoride related of other sorbent and reusable for several times that makes this method nearly green and friendly environmentally.File | Dimensione | Formato | |
---|---|---|---|
1-s2.0-S0957582017300940-main.pdf
solo gestori archivio
Tipologia:
Full text (versione editoriale)
Licenza:
NON PUBBLICO - Accesso privato/ristretto
Dimensione
5.71 MB
Formato
Adobe PDF
|
5.71 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
Removal of fluoride from aqueous solution_AcceptedManuscript.pdf
accesso aperto
Descrizione: Post print
Tipologia:
Post-print
Licenza:
Creative commons
Dimensione
4.01 MB
Formato
Adobe PDF
|
4.01 MB | Adobe PDF | Visualizza/Apri |
I documenti in SFERA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.