Secondary ion mass spectrometry (SIMS) was used to analyse the formation mechanism of IrO2/ZrO2 film electrodes. The coating mixtures with compositions 20%Ir+80%Zr and 50%Ir+50%Zr prepared on titanium supports from alcoholic solutions of IrCl3.3H2O and ZrOCl2.8H20 precursors were heated to specified temperatures and analysed by SIMS. The process of the electrode film evolution was followed via concentration depth profiles of O-, CI-, IrO2-, ZrO2- and TiO2- selected species. It was found that at lower temperatures and lower noble metal contents, the governing mechanism of oxide formation is hydrolysis, while at higher temperatures and higher noble metal concentrations the oxidative mechanism of film formation prevails. The surface accumulation of IrO2, observed by SIMS at 500 °C for films with less than 50% IrO2 content, and of ZrO2, observed for films with over 50% IrO2, was confirmed by emission Fourier transform infrared measurements. No reaction between film components or between coatings and support was identified in the systems investigated. The results are in harmony with, and complementary to, those of former measurements by RBS and WAXS.
Secondary ion mass spectrometric studies on the formation mechanism of IrO2/ZrO2 based electrocatalytic thin films
DE BATTISTI, Achille;
1996
Abstract
Secondary ion mass spectrometry (SIMS) was used to analyse the formation mechanism of IrO2/ZrO2 film electrodes. The coating mixtures with compositions 20%Ir+80%Zr and 50%Ir+50%Zr prepared on titanium supports from alcoholic solutions of IrCl3.3H2O and ZrOCl2.8H20 precursors were heated to specified temperatures and analysed by SIMS. The process of the electrode film evolution was followed via concentration depth profiles of O-, CI-, IrO2-, ZrO2- and TiO2- selected species. It was found that at lower temperatures and lower noble metal contents, the governing mechanism of oxide formation is hydrolysis, while at higher temperatures and higher noble metal concentrations the oxidative mechanism of film formation prevails. The surface accumulation of IrO2, observed by SIMS at 500 °C for films with less than 50% IrO2 content, and of ZrO2, observed for films with over 50% IrO2, was confirmed by emission Fourier transform infrared measurements. No reaction between film components or between coatings and support was identified in the systems investigated. The results are in harmony with, and complementary to, those of former measurements by RBS and WAXS.I documenti in SFERA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.